Top » Catalog » RC & Servo »

$39.90

BL3F 6 Channel Reciever

BL3F 6 Channel Reciever (WATER PROOF)


Gyro built-in
Channel: 6
Built-in Car Lighting Control System output (5V): Cornering Lamp, Stop Lamp, Flash Light, Back-up Lamp, Daytime Running Light
Can achieve steering, headlight, brake, reverse, atmosphere, emergency light linkage simulation vehicle control light. Different mode can be set.
Built-in 10A ESC BEC:6V/1.5A 2-3S LiPo
Suitable for small RC car modification. Support 130-280 Brushed Motor, no need to install extra ESC. One receiver for all lighting and ESC control.
Compatible with Dumbo X6 RC
Operating Range: 400m (In Air)
Antenna Length: 172mm
Operating Voltage: 4.8-10V
Weight:7g
Size: 40 x 27 x 15mm

Reviews
Shopping Cart
1 x 70x30mm Stainless Steel Turn Fin
1 x 32x38mm Trim Tabs
1 x 44x16mm Trim Tabs
1 x Volvo Original Shaft
1 x Mono 1 Shaft Set
1 x 1:76 Turbo Racing C71
1 x 3.18mm 3-Blade Copper Prop 36mm
1 x M2 to M4 Shaft End
1 x Mono 1 Inner Shaft
1 x 2.2mm Hardended Drive Shaft 55mm Length
1 x 1:76 Turbo Racing C81
1 x 38x55mm Trim Tabs
1 x 22mm Jet Nozzle
1 x 6.35mm x 90mm Hardended Driveshaft Positive
1 x Mono 2 Inner Shaft
1 x X6DC 6 Channel Reciever
1 x 5mm Hardended Drive Shaft 86mm Length
1 x Mini Mono Inner Shaft
1 x FLYSKY FS-GT2B 2.4G RC Set
1 x 57x46mm Trim Tabs
1 x 1:76 Turbo Racing C18
1 x 10g Servo Metal Gear
1 x TFL Integrated Drive System
1 x BL3F 6 Channel Reciever
1 x TFL Outboard Gear Engine
1 x 2 Blade 48mm Stainless Steel Prop for 4.76 Shaft (Positive Only)
1 x 2 Blade 43mm Stainless Steel Prop for 3.18 Shaft (Positive Only)
1 x 15mm Jet Nozzle
1 x FLYSKY FS-GT2 GT3 2.4G Reciever
1 x 6g Servo Metal Gear
1 x 3mm Hard Shaft Set with Drive dog+Prop End+Copper Tube
1 x 25g Servo Metal Gear
1 x 62x51mm Trim Tabs
1 x RC4GS V2
1 x TFL 29mm Jet Nozzle Reverse
1 x TFL P1 In-Outboard Drive
1 x R6FG 6 Channel Reciever
1 x Dumbo X6
1 x 2 Blade 40mm Stainless Steel Prop for 4.76 Shaft (Positive Only)
1 x 4.76mm x 100mm Hardended drive shaft
1 x TFL 29mm Jet Nozzle
1 x FLYSKY FS-CT6B 2.4G RC Set
1 x 5mm Hardended Drive Shaft 106mm Length
1 x TFL Outboard Engine
1 x 44x30mm Trim Tabs
1 x 62g Servo Metal Gear
1 x 3.18mm Hardended Drive Shaft 66mm Length
1 x Shark Mono-1 Original Shaft
1 x Lighting Switch Cable
1 x 22g Servo Metal Gear
1 x 49x76mm Trim Tabs
1 x 342mm Length Motor Mount Shaft Tube
$2,080.00
Notifications
NotificationsNotify me of updates to BL3F 6 Channel Reciever
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Currencies

Copyright © 2024 RC-Craft
Powered by osCommerce