Top » Catalog » Boat Ready to Run » Pursuit2

$446.00

Pursuit 2
[Pursuit2]

Pursuit 2 Brushless
Anti-Turnover Design
It can auto turnover back to normal when it turn up-side-down.
Water Cool system for Brushless ESC and Motor
High Speed In Runner Brushless Motor
Extra Protection pre-made Water Proof ESC and Servo over than original package.

You only need put on a Radio and Receiver Set (Recommend 2.4G) and Batteries Set (Recommend Li-Po 6S 22.8V)

You can buy 2.4G Radio Set (USD39.0) from Us and ship together as FREE SHIPPING.

Tips for beginner: Remember connect the Silicon water tube to the Rudder for water in-take.

Length
820mm
Width
240mm
Weight
2.5g (Shipping 3.5kg)
2 blade Propeller
D44XP1.4-Copper
Radio (Not Included)
2channel
Brushless MOTOR
3660-1620KV
Brushless ESC
SeaKing 120A Water Proof
Servo
Yes, Water Proof
Battery (Not Included)
4S (15.2V)/5S(19V)/6S(22.8V) 5000-6000mah LiPo
Color Painted
YES
Hull Material
Fiberglass(FRP)

You can choose EMS Speed Post for faster shipping in our Postage Rate select 3.0kg EMS and add to your shopping cart.

We can provide tracking no. if you choose EMS shipping.
Reviews
Categories
Video
Boat Ready to Run
Bare Hulls
NEW Drive System
Realistic Deco
Shaft kits->
Props
Motor->
ESC's->
Batteries/Charger->
Rudder
Stinger/Strut
Trim Tabs
Turn Fin
Cooler->
RC & Servo
Accessories->
Tools
Postage Rate
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
What's New?
6g Servo Metal Gear
6g Servo Metal Gear
$25.90
Information
SHIPPING
PAYMENT
Customer Services
Contact Us
Shopping Cart
2 x Red Sword Original Shaft
2 x TFL P1 In-Outboard Drive
2 x Shark Mono-1 Original Shaft
1 x TFL 29mm Jet Nozzle
2 x 40cm Mini Mono
1 x iMax B6AC Balance Charger
1 x Wood Deep V
2 x 3.18mm Hardended Drive Shaft 58mm Length
2 x 1/32 PERKASA Patrol Boat
1 x iMax 4B6 Balance Charger
2 x 3mm Hard Shaft Set with Drive dog+Prop End+Copper Tube
3 x Smash Shark
2 x Mini Mono Shaft Set
2 x Mono 1 Inner Shaft
1 x 3.18mm Hardended Drive Shaft 66mm Length
1 x Wood Out Rigger Big
3 x POPEYE
1 x Balance Charger Board
2 x North West Wind
2 x Mono 2 Shaft Set
3 x 94cm CAT Genesis
2 x 15mm Jet Nozzle
2 x Wood Out Rigger Small
1 x 1:76 Turbo Racing C18
3 x 22mm Jet Nozzle
2 x Mono-1 Carbonate
1 x B3 20W 2S/3S Balance Charger
2 x Mini Flash
1 x Volvo Original Shaft
2 x Mono 1 Shaft Set
2 x TFL Outboard Engine
1 x TFL Outboard Gear Engine
2 x 342mm Length Motor Mount Shaft Tube
3 x Pursuit2 Carbonate
2 x Mini Plastic CAT
1 x 96mm Rudder with Dual water in-take
1 x 4mm Flex Cable Collet EX
1 x Universal Joint 6.35 x 4mm
1 x 30x30 Water Cooler
1 x 10mm Tube Camp
1 x 52mm Rudder with water in-take
1 x Micro Rudder Joint
2 x 4.76mm Strut with Rudder for CAT
1 x 90mm Rudder Blade with water in-take
1 x 4mm Flex Cable Collet M6.35 Thread
1 x 22g Servo Metal Gear
2 x 4.76mm Strut for CAT
1 x 46x16mm SS Turn Fin
1 x 6.35mm Flex Cable Collet for 6mm Shaft Motor
1 x TFL Integrated Drive System
1 x Tenshock Mini Rudder
1 x 130mm Rudder with water in-take
1 x Spring Joint 2.3x3
1 x Alumimum Joint 5mm to 4mm
1 x 50A Brushless ESC with BEC
1 x Spring Joint 2x2
1 x Spring Joint 3.18x4
2 x TFL 4.76mm Stinger
1 x 38x55mm Trim Tabs
2 x 4.0mm Strut with Rudder for CAT
1 x Rudder Servo Mount
1 x 160mm Rudder with water in-take EX
1 x 115mm Rudder Blade with water in-take
2 x 4.0mm Strut with for CAT
1 x Micro Rudder Joint L
1 x 2.0 Flex Cable Collet for 3.18mm Shaft Motor
1 x Full Drip Rudder Copper S
2 x Mini Mono Inner Shaft
2 x 4.76mm Strut with Rudder
2 x 4.76mm Stinger with for CAT
1 x Spring Joint 4x4
1 x Spring Joint 4x3
1 x 180mm Rudder with water in-take
1 x 160mm Rudder Blade with Dual water in-take
1 x 95mm Rudder with water in-take
1 x 57x68mm Trim Tabs
1 x 75mm Rudder with water in-take
1 x Water Cool 30A Micro Bidirectional BRUSHED ESC
1 x Mast
1 x ECO
1 x Speaker
1 x 1:35 Copper French
1 x Little Princess
1 x ASURA MONO 2
1 x Life Boat
1 x 4mm Strut
1 x 2.2mm Hardended Drive Shaft 55mm Length
1 x M3 Plastic Screw
1 x 4mm Long Strut
1 x Light Hull #5
1 x 40cm Mini O
1 x 4.76mm Strut
1 x 3.18mm Strut
1 x 5mm Hardended Drive Shaft 86mm Length
1 x Light Hull #2
1 x Light Hull #4
1 x Mini Plastic Rocket
1 x M4 Prop End
1 x Hurricane Mono 1
1 x Pursuit2
1 x 2mm Strut
1 x 4.76mm Long Strut
1 x Drive Wheel
1 x Mono 2 Inner Shaft
1 x Rada Motor
1 x 4mm 50mm Long Strut
1 x M2 to M4 Shaft End
1 x 6.35mm x 90mm Hardended Driveshaft Positive
1 x 6.35mm Strut with Twins Rudder
1 x 5.0mm Strut
1 x 4.0mm Strut with Rudder for Outrigger
1 x 80cm O Fiberglass
1 x Anchor Windlass
1 x 1:35 Copper French
1 x 1:35 Copper French Wheel
1 x Work Boat
1 x 4.76mm x 100mm Hardended drive shaft
$10,233.90
Notifications
NotificationsNotify me of updates to Pursuit 2
Share Product
Share via E-Mail
Share on Facebook Share on Twitter
Currencies

Copyright © 2024 RC-Craft
Powered by osCommerce